What are Deployment Model Options on DMC3 Builder?
Download as pdf :
Products:
Aspen DMC3, Aspen DMC3 Builder
Last Updated:
12-Dec-2023
Last Updated:
12-Dec-2023
Versions:
Article ID:
000101682
Article ID:
000101682
Primary Subject:
Problem Statement
This article described what are the Deployment Model Options on DMC3 Builder.
Solution
The different Model Options on the Deployment node of DMC3 Builder is a new feature that was included starting from V12.1. The main reason of having this deployment option is to decrease the size of the file when a snapshot of the controller is taken as well as reduce the memory used for DMC3 Builder when the Controller applications are deployed. This could be helpful to avoid further memory issues on the server, if the deployment is happening directly on the Online Server.
The three supported options are:
Retain no Case Models
Retain only Case Models referenced in the Master Model
Retain all Case models (Requires loading all models into memory)
Retain no Case Models
– it allows to deploy the Master Model without saving any results from Model ID. The Cases of the Controller will still appear on the application but they will appear as if they havent been run.
Retain only Case Models referenced in the Master Model
– this option will keep only cases that we used to built the Master Model, the rest of Cases will be deleted. Show model ID results but only the one that was used to update master model.
Retain All Cases
– this option will keep All cases saved, regardless were used on the Master Model or Not (full project snapshot). This is the Classic DMC3 Deployment. This is the option that will consume more memory.
Keywords
DMC3, Deployment, Models